Mimaki UV printer Layer mode error

Mimaki UV printer Layer mode error

Problem/Question
After change the layer mode at Mimaki UV printer models get following error message:
“Layer mode is not compatible with the print mode (resolution) ..."

This error message indicates that the printer data (print modes) has not yet been sent to the RIP.
Note: Some print modes are not available for a selected setup. Please change the print mode.

Solution/Work-Around
To change the layer mode you are currently in the Print Environment in the "Device Options" field. Execute the following steps from there:
  1. In the "Device Options" field, click the <Retrieve print modes from printer> button.
  2. Follow the further instructions

Related Articles & Links



    • Related Articles

    • Mimaki – Parameter Error (PICT)

      Problem/Question When sending a job to a Mimaki printer, the job is not printed and you get an error message on the printer display. The print settings and device options of the current Print Environment are not supported by the printer. This may be ...

    • Mimaki - Error 11 or 202 Parameter

      Problem/Question When sending a job to a Mimaki printer, the job is not printed and you get an error message on the display of the printer: “ERROR 11 - PARAMETER ERROR" or "ERROR 202 - PARAMETER" depending on the model you are using. The print ...

    • Mimaki – Missing job details in Mimaki PICT

      Problem/Question Printed jobs with the Ergosoft RIP miss job details (e.g., media name) in Mimaki’s dashboard of the Cloud Technology PICT (https://mimaki.com/product/software/remote/pict/). This may be because you are using a Print Environment that ...

    • How to load an XML resolution file into a Print Environment (Universal Driver)

      Problem/Question You receive an error message when closing the Print Environment after loading a new XML file in the Device options? Re-open the Print Environment might be the solution. Not every driver is able to access the XML data right after ...

    • Error when sending data to "Port name"

      Problem/Question When sending print data, the following error message appears from the Print/CutQueue “Error when sending data to "Port name". The process hosting the driver for this device has ended." This error message indicates that there are ...