Mimaki CJV150 Cut Only

Mimaki CJV150 Cut Only

Problem/Question
Cut Only job is moved to the Done section after dispatch but the device is not moving - not cut has been done.

Caused by the variety of different USB driver provided by Mimaki, somtimes cut only on the CJV150 does not work properly.

Solution/Work-Around
  1. Add a new Cut Environment based on the Mimaki CG-FX (Cut Only) driver.
  2. Use the existing Cut Queue (originally made for CJV150 Cut Only).
  3. Deactivate Print Barcode within Cut Settings.
  4. Import Cut file.
  5. Send job via <Cut> button.
  6. Release cut job in the Queue to the plotter.
The cut only job will now cut on the CJV150 as inteded.

    • Related Articles

    • Connect Multiple Mimaki USB printers

      Problem/Question When connecting several Mimaki USB printers to one Ergosoft RIP PC, connection problems might come up and the question arises “How do I set up multiple Mimaki USB Printers to run on the same PC?" Mimaki has no set restriction on how ...

    • Mimaki USB connectivity issues

      Problem/Question RIP PC or Ergosoft gets no connection to the printer or data transfer stops in the middle of printing using a USB connected Mimaki printer. Solution/Work-Around Check the connection of the USB Cable Remove the USB cable at the end of ...

    • Mimaki USB connectivity issues

      "RIP computer and Machine can’t be connected, what should I do? " Problem When RIP Computer and PC cannot be connected well or data transfer stops in the middle of printing, please follow the below information and check if the problem persists.  ...

    • USB Mimaki port cannot be opened

      Problem/Question Printing is not possible, the Mimaki printer rejects the data when sending a job from the PrintQueue. The message above indicates, that the USB communication cannot be established properly. The communication between the PC and the ...

    • About the Cut Workspace

      This video explains how to activate the contour cut features in the Ergosfot RIP and how to switch to the dedicated Cut Workspace: https://youtu.be/iNt_AAWBNOk