Issues with printing multiple copies

Issues with printing multiple copies

Problem/Question
When printing multiple copies only one copy is printed and/or you receive an error message.

Solution/Work-Around
The general recommendation is the use of "Without Gap - Repeat Print Marks"

Sometimes multiple copies have to be defined at the frontend of the printer.
With other printer models the option "New job per copy" has to be selected.

    • Related Articles

    • Printing copies with Epson SureColor SC-F10000

      Problem/Question The option "without gap" is missing in the print dialog when selecting more than 1 copy. When printing more than 1 copy, the printer always repeats the print marks between the copies; having print marks just at the beginning of the ...

    • Correct cancellation of a print job

      Problem/Question How to cancel a print job with multiple copies and continue printing with the appropriate number of copies? Solution/Work-Around Switch the PrintQueue to offline Cancel the job in the queue by using the context menu (right click) ...

    • Mimaki USB connectivity issues

      Problem/Question RIP PC or Ergosoft gets no connection to the printer or data transfer stops in the middle of printing using a USB connected Mimaki printer. Solution/Work-Around Check the connection of the USB Cable Remove the USB cable at the end of ...

    • USB Mimaki port cannot be opened

      Problem/Question Printing is not possible, the Mimaki printer rejects the data when sending a job from the PrintQueue. The message above indicates, that the USB communication cannot be established properly. The communication between the PC and the ...

    • Printer Pools

      Enable load balancing on multiple print devices of the same type Problem/Question “Is it possible to distribute the print jobs evenly to several printers?" You have several printers of the same type and want to realize a kind of "load balancing". ...