How to use Summa F-Series Cutters?

How to use Summa F-Series Cutters?

Problem/Question
How to use Summa F-Series Cutters?

Solution/Work-Around
To use the Summa F-Series Cutters, you should follow the normal Ergosoft procedure for cutting.
It just need special attention regarding the Driver mode you want to use.
Please, see below the different options available.
  1. Summa F-Series - Standard driver
  2. Summa F-Series POSTNET- Use the POSTNET barcode
When using Summa F-Series and Postnet drivers, the option for "Cutting Tool" can be select from a default list.
  1. Summa F-Series Go Produce - Use the GoProduce software
For the Summa F-Series GoProduce, the "Cutting Tool" list needs to be loaded.
To load such a list into your system, you need to upload the "Material List" into your Cut Environment.
Please follow the steps below:
  1. Select your Cut Environment
  2. Open the Cut Settings
  3. Select the "Device Options" tab
  4. Select "Use Material XML"
  5. "Setup" and "Browse" for the file
  6. Click "OK"
  7. Now a list should be visible in your Cut Environment
  8. Click "OK" to close and save the Cut Environment
Now when opening the "Cutting Tool" tab, you should be able to select the Media and Method.

    • Related Articles

    • How to setup Summa S & Summa S2 Class plotters (from 16.4)

      Problem/Question After an update the Summa plotter works not as intended. You are confused about the variations of available drivers and need to know which driver to choose. Solution/Work-Around Just choose the type as described below: DRAG_HEAD ...

    • Cut button grayed out / not available

      Problem/Question ContourCut is licensed, but the “Cut” button in the software is grayed out and cannot be used. Solution/Work-Around “Contour Cut” has to be activated Within JobComposer select "View" (top menu) Open "Tools" Check "Cut Environments" ...

    • Wrong pressure settings with Summa S series driver - Ergosoft RIP 15

      Problem/Question Working with a Summa S series cut driver in Ergosoft 15 (latest build) can lead to wrong pressure settings even the cut environment setting "Pressure" ist set to "device setting". This is an unintended behavior in Ergosoft RIP 15 ...

    • Summa license error (from 16.4)

      Problem/Question Using older Summa CutEnvironments containing S-Class or S2-Class driver with Ergosoft 16.4 or later can lead to error messages like "Contour Cut Driver not licensed. Please select a model on the General page. Continue anyway?" or ...

    • Print & Cut Devices possible Cut driver selection

      Problem/Question For Print and Cut devices, usually up to 3 different Cut drivers (Cut after, Using Marks and Cut only) can be selected. Some of them are arranged "hidden". "Where can I find the individual Cut drivers and how to add them?" ...