How to Print K as RGB with CMYK PDF

How to Print K as RGB with CMYK PDF

Problem/Question
How to print K as RGB when using a CMYK PDF?

Solution/Work-Around
This is only possible when using the Legacy PDF interpreter.

How to use "Legacy" PDF Interpreter>
  1. "Options" menu at JobComposer
  2. "Application Defaults"
  3. "PDF interpreter"
  4. Select "Legacy"
  5. Click <OK>
Treat K as RGB:
  1. Select the file in the JobComposer
  2. Image Properties "Color Management PostScript\PDF"
  3. Select "Advance" tab
  4. Check option "Treat K as RGB"
  5. Click <OK>

    • Related Articles

    • How to print a multi-page PDF in individual pages and let the Epson SC-F6400 cut the media after each page

      Problem/Question How to print a multi-page PDF in individual pages and let the Epson SC-F6400 cut the media after each page? Solution/Work-Around Download and install Ergosoft 17.5.0.9443 Open the Ergosoft ControlCenter Start the JobComposer Activate ...
    • Difference between ink assignment in the Print Environment and printer

      Problem/Question In some Print Environments, the ink assignment shows only CMYK although the printer has additional spot color channels (e.g. orange, blue, green, light colors etc.). Additionally, there is the problem that no Cost Calculation is ...
    • Print Environment Invalid or Wrong Version

      Problem/Question When importing a Print Environment, the user gets a warning message that says:  “Print Environment file invalid or wrong version" This error message appears when trying to import a Print Environment into an older or wrong version of ...
    • [AE=1506] PRINT ERROR #-3

      Problem/Question When printing, the rasterizing process stops and the RIPServer shows an error message that says: “[AE=1506]:PRINT ERROR #-3" This error can be found when trying to RIP a file in RipServer. Solution/Work-Around Check the user access ...
    • Deterioration in print quality after an ink changeover

      Problem/Question A deterioration in print quality is detected after an ink changeover. How can the print quality be restored? Solution/Work-Around Copy the PrintEnvironment used before an ink changeover and name it differently Remove the embedded ...