How to create a new Color Profile based on an existing measurement

How to create a new Color Profile based on an existing measurement

Problem/Question

You successfully went through the profiling process with ColorGPS but still want to tweak your ICC without the need to re-measure?


Solution/Work-Around

ColorGPS automatically saves the session (.cpd) so you can generate many profiles with different settings out of a single measurement. Here's how you can do a second ICC:
  1. Copy the existing PrintEnvironment
    (backup so that you can keep the original state)
  2. Open the ColorGPS tool
  3. Import the measured values by using one of the following options
    1. Click on the "File" tab and select the measurement that matches the PrintEnvironment from the list below Description entry
    2. Go to "File > Open" and navigate to the User Data folder
      1. Go to "Data > Color > ColorCali" and select the measurement that matches the PrintEnvironment
  4. Now you can change various settings under Options and create a new Color Profile.

Related Articles & Links

  1. Manage Print Environments
  2. Color Profile
  3. Black Point Architect
  4. Custom Dithering Settings

    • Related Articles

    • How to control the usage of Fluo-Colors in Color Profile

      Problem/Question Your printer contains Fluo-Colors such as Fluo-Pink or Fluo-Yellow. You performed an Output Calibration in Ergosoft. How can the use of Fluo-Colors be adjusted? Solution/Work-Around Create a duplicate of the Print Environment used as ...

    • Deterioration in print quality after an ink changeover

      Problem/Question A deterioration in print quality is detected after an ink changeover. How can the print quality be restored? Solution/Work-Around Copy the PrintEnvironment used before the ink changeover and name it differently. Remove the embedded ...

    • How to use ColorGPS profiles in third party software

      Problem/Question How to use ColorGPS profiles in third party software? Some third party software allow us to use external profiles for different reasons as simulation and proofing. Solution/Work-Around CMYK ColorGPS profiles can be used directly in ...

    • ICC Color Usage and Limits is grayed out

      Problem/Question All ColorGPS Profile Editor features are active except the "ICC Color Usage and Limits" is grayed out. Solution/Work-Around The option "ICC Color Usage and Limits" is only active if the used Print Environment contains additional ...

    • Some installed inks cannot be controlled via the Output Profile

      Problem/Question When printing an Ink Assignment Chart, not all inks contained in the printer are output. These missing colors cannot be calibrated as part of the Output Calibration. Why is this the case? Solution/Work-Around Due to manufacturer ...