How to print a multi-page PDF in individual pages and let the Epson SC-F6400 cut the media after each page

How to print a multi-page PDF in individual pages and let the Epson SC-F6400 cut the media after each page

Problem/Question

How to print a multi-page PDF in individual pages and let the Epson SC-F6400 cut the media after each page?

 

Solution/Work-Around

  1. Download and install Ergosoft 17.5.0.9443
  2. Open the Ergosoft ControlCenter
  3. Start the JobComposer 
  4. Activate Auto cut within Print Environment Settings
  5. Create an Image Preset that causes individual pages to be separated
  6. Select the Image Preset
  7. Import a multi-page PDF
  8. Activate Print Pages as Separate Jobs within the Print Dialogue  
  9. Pages are sent to the PrintQueue in individual jobs. After printing a job, the Epson SC-F6400 performs a cut.

Useful Articles:

Print Environment Settings

Image Presets


    • Related Articles

    • Print & Cut Devices possible Cut driver selection

      Problem/Question For Print and Cut devices, usually up to 3 different Cut drivers (Cut after, Using Marks and Cut only) can be selected. Some of them are arranged "hidden". "Where can I find the individual Cut drivers and how to add them?" ...

    • Epson Edge Dashboard Media Selection

      What presetting must be made in the Epson Edge Dashboard for custom profiling? When using an Epson HTM driver, media presets can be called up in the device options. This is usually done via the Epson Edge Dashboard for the Epson printer registered ...

    • Create Job Package

      Problem/Question In addition to archiving a job from a Queues, e.g. to be able to edit it again with all settings, Print and Cut Environments including the file used in the JobComposer, Ergosoft also offers the option of creating a so-called Job ...

    • Epson Edge Dashboard Interface

      What is Epson Control Dashboard and how it can be used? The Epson Dashboard contains a status interface. With the advanced Epson HTM drivers you can load settings and profiles from this interface ('.emx' profiles can be imported directly into PrEnv ...

    • Mimaki CJV150 Cut Only

      Problem/Question Cut Only job is moved to the Done section after dispatch but the device is not moving - not cut has been done. Caused by the variety of different USB driver provided by Mimaki, somtimes cut only on the CJV150 does not work properly. ...