[AE=1504] Error 10053 WSAECONNABORTED

[AE=1504] Error 10053 WSAECONNABORTED

Problem/Question
PrintQueue aborts the printing process with Error message

“WSA Error WSAECONNABORTED” and
“[AE=1504]: An unexpected error occurred while sending data to [Port Address]“
"Error sending data to "[Port Address]".  Error 10053 An established connection was aborted by the software in your host machine."

The software caused connection abort.
An established connection was aborted by the rip, possibly due to a data transmission time-out or protocol error.

Solution/Work-Around
  1. Check the physical connection between printer an PC
  2. Change the cable if necessarry 
  3. In case of TCP:
    1. Ping the IP adress of the printer, as the printer is switched on, to check if it is accessable
    2. Switch off the printer and ping the IP adress again. 
    3. If it is still accessable, there is a double assignment (e.g. because of a wlan connection of another device)
    4. Change the IP adress of the printer
  4. Remove the printer port and add it again
  5. Open Windows Update destabilize the network environment, please finish all updates before start printing.

Related Articles & Links

    • Related Articles

    • [AE=1506] PRINT ERROR #-3

      Problem/Question When printing, the rasterizing process stops and the RIPServer shows an error message that says: “[AE=1506]:PRINT ERROR #-3" This error can be found when trying to RIP a file in RipServer. Solution/Work-Around Check the user access ...

    • [AE=1505] HP Raster Library Error –2

      Problem/Question RIP Server stops processing the Job in print mode and displays the error message [AE=1505] HP Raster Library Error –2 „HP Raster Library Error –2 Invalid parameter“ This error message most commonly appears on certain HP models when ...

    • Windows Error 996

      Problem/Question Windows message with the description “Error 996” There can be many events which may have resulted in the system files errors. An incomplete installation, an incomplete uninstall, improper deletion of applications or hardware. It can ...

    • Mimaki - Error 11 or 202 Parameter

      Problem/Question When sending a job to a Mimaki printer, the job is not printed and you get an error message on the display of the printer: “ERROR 11 - PARAMETER ERROR" or "ERROR 202 - PARAMETER" depending on the model you are using. The print ...

    • Error 0x18080001 An internal error has occurred

      Problem/Question When trying to activate the license ticket online you receive an error message: "Error 0x18080001 An internal error has occurred. Please try again later." This error message indicates that there is a communication problem between the ...