Epson Edge Dashboard Media Selection

Epson Edge Dashboard Media Selection

What presetting must be made in the Epson Edge Dashboard for custom profiling?

When using an Epson HTM driver, media presets can be called up in the device options. This is usually done via the Epson Edge Dashboard for the Epson printer registered there.

When one of these media presets is selected, a media profile is also embedded in most cases. If a media preset for the medium used in production is available in the Epson Edge Dashboard, this can usually be used without any problems.

The situation is different as soon as a medium is to be used for which Epson does not provide a preset or an output quality is to be used that is not available in the selected preset.

 

Ergosoft offers a separate driver for some of these Epson drivers, which can be used for profiling without access via the Epson Edge Dashboard. In both cases, a media setting without an embedded media profile must be selected on the printer.


Solution/Work-Around

To create a media preset without profiling, proceed as follows

  1. Open the Epson Edge Dashboard via the taskbar in the browser
  2. Select "Printer Operation" in the  menu
  3. Select the registered Epson printer
  4. Select the "Media Settings" tab
  5. In the window at the bottom right,  click on the  icon
  6. Assign a unique media name
  7. Check the settings listed below for correctness *
  8. Click <OK>
  9. Assign the new medium to the printer via <Apply>
* Note: If an existing medium has already been printed correctly, this should be selected before creating a new medium. The settings are applied.

Related Articles & Links


    • Related Articles

    • Epson Edge Dashboard Interface

      What is Epson Control Dashboard and how it can be used? The Epson Dashboard contains a status interface. With the advanced Epson HTM drivers you can load settings and profiles from this interface ('.emx' profiles can be imported directly into PrEnv ...

    • Calibration & Profile with White Ink as “User modified curve”

      Problem/Question “How to do a Calibration & Profiling with White Ink underlay, using a User modified curve" Solution/Work-Around In order to do a Calibration & Profile with the White Ink underlay, there is a need to define how we want to manage the ...

    • Calibration & Profile with White Ink using “Legacy modes"

      Problem/Question “How to do a Calibration & Profiling with White Ink underlay, using Legacy Modes" Solution/Work-Around In order to do a Calibration & Profile with the White Ink underlay, there is a need to define how we want to manage the white ...

    • Change embedded CMM files to external

      Problem/Question “How can I set embedded color management files like Density and ICC to external in my PrintEnvironment?" Working with Ergosoft default workflow, density and output profile (ICC) are embedded automatically in the PrintEnvironment. For ...

    • Epson HTM Driver error -7 when retrieving EMX data

      Problem/Question When retrieving EMX data from Epson Edge Dashboard in Epson HTM drivers you get the error message “Failed to retrieve EMX data from Epson Ege Dashboard. -7" This error message indicates that the Epson Edge Dashboard has not started ...