Easy generation of Print Environment for HP Latex 700/800/W
Problem/Question
The HP Latex 700/800/W works with so called "Substrate Presets" containing color management, resolution settings and hardware parameters to classify different print modes. Some generic Substrate Presets already stored in the printers are meant to enable a convenient, fast setup. To generate a new print mode, please refer to the HP Latex manual.
How can I synchronize the preset zu Ergosoft?
Once created, importing these presets to Ergosoft RIP is easy.
Solution/Work-Around
Consider, that this is a Contone driver. After following the instruction, Ergosoft applies the color management to the sent job - the printer's CPU will then rasterize the data.
- Start Ergosoft Job Composer, add a new Print Environment (use the corresponding HP Latex driver) and set up the port
- Navigate to the Device Options tab and select the desired media and print mode
- Press the "Import ICC Profile" button - the ICC is now embedded into the Print Environment (see Quality tab > Printer Profile)
- Navigate to General tab and give the Print Environment a name
(It is recommended to use the "Auto" button and then maybe change individual details.)
Notes
- There are 3 different options to get a Substrate Preset
- Use one of the existing generic ones
- Download one from the HP Media Locator (on the printer panel)
- Create an individual preset and generate an ICC using the in-line spectrophotometer (on the printer panel)
- You can also generate color management with Ergosoft RIP
- Generate a media and print mode (substrate preset) on the printer panel without creating an ICC
- Create a new Print Environment and select the media an print mode
- Do the Ergosoft Output Color Management workflow (Linearization, Ink Limit, Printer Profile)
- Decide whether to do the CMM with the printer or with the Ergosoft RIP - do not mix.
- Make sure to have a suitable measurement device (like e. g. i1 Pro 3) and a ColorGPS license if you wish to create ICC with Ergosoft RIP.
Related Articles
How does the HP media profiling workflow work?
Problem/Question On the one hand, the HP print environments offer the option of synchronizing and setting the media profiles installed on the printer. However, if no suitable media is available from HP for the media used, you can create your own ...
JobComposer crashes after adding an HP DesignJet Z6 Print Environment
Problem/Question After adding an HP DesignJet Z6 Print Environment, the JobComposer crashes repeatedly when trying to open it. Likewise it can come to an error message "Not enough memory". When sending a print job, the RipEngine crashes and the job ...
Print Environment Invalid or Wrong Version
Problem/Question When importing a Print Environment, the user gets a warning message that says: “Print Environment file invalid or wrong version" This error message appears when trying to import a Print Environment into an older or wrong version of ...
X-Rite i1 Pro 3 not working with HP Easy Profiling
Problem/Question Trying to measure an HP Easy Profiling chart with an X-Rite i1 Pro 3 you may face the situation that the device selection window does not disappear when pressing the "Ok" button. Unfortunately, it is not an officially supported ...
Difference between ink assignment in the Print Environment and printer
Problem/Question In some Print Environments, the ink assignment shows only CMYK although the printer has additional spot color channels (e.g. orange, blue, green, light colors etc.). Additionally, there is the problem that no Cost Calculation is ...