Delete Print- & CutQueue

Delete Print- & CutQueue

Problem/Question
Print & Cut Queues that can no longer be used can be removed from the list at any time.
"How to remove a Print & CutQueue with all associated data?"

Solution/Work-Around
  1. Go to the Ergosoft ControlCenter
  2. Select the TAB "Queues"
  3. Click on the <Manage> Button
  4. Select the Queue you no longer need from the drop-down menu
  5. Click on the <Delete> Button
Note: The queue will be removed from any associated Print and Cut Environment. Print and Cut Environments that are no longer in use should also be removed.

Afterwards the corresponding spool folder must be removed. This is located (unless otherwise defined) in the parent Standard Spool Folder
  1. Find the corresponding spool folder under C:\Users\Public\Documents\EsRip\16\Files\Spool
  2. Remove it manually
Note: all spool data is removed from the system. The spool folder is no longer available in the Print Environment manager.

Related Articles & Links:



    • Related Articles

    • How to create a custom PrintQueue Maintenance Job

      Problem/Question To prevent printhead nozzles clogging in certain situations, Maintenance Jobs can be activated in the PrintQueue. Maintenance Jobs are small print jobs to be printed between production jobs utilizing all inks channels. There are ...

    • Print & Cut Devices possible Cut driver selection

      Problem/Question For Print and Cut devices, usually up to 3 different Cut drivers (Cut after, Using Marks and Cut only) can be selected. Some of them are arranged "hidden". "Where can I find the individual Cut drivers and how to add them?" ...

    • How to print a multi-page PDF in individual pages and let the Epson SC-F6400 cut the media after each page

      Problem/Question How to print a multi-page PDF in individual pages and let the Epson SC-F6400 cut the media after each page? Solution/Work-Around Download and install Ergosoft 17.5.0.9443 Open the Ergosoft ControlCenter Start the JobComposer Activate ...

    • Re-open a job from Queue in JobComposer using Archive feature

      Problem/Question Facing problems with unintended different print outs, questions arises like "How can I be sure, two completed jobs were done with the same settings?" or "Can I reproduce a done job in JobComposer?" Solution/Work-Around Ergosoft ...

    • [AE=1506] PRINT ERROR #-3

      Problem/Question When printing, the rasterizing process stops and the RIPServer shows an error message that says: “[AE=1506]:PRINT ERROR #-3" This error can be found when trying to RIP a file in RipServer. Solution/Work-Around Check the user access ...