Calculate media consumption
Problem/Question
The media consumption on the JobTicket shows only the media lenght
“How can I switch to square meters?"
If
width (and length) of the loaded media are not set in the PrintQueue,
the job dimensions are used to calculate the media consumptions instead
automatically.
Solution/Work-Around
- Go to the PrintQueue of the Print Environment in use
- Set it to <Offline>
- Enter the media width manually, or
- Click the <Refresh> Button in the media field (if the printer supports it)
Related Articles & Links
Related Articles
Contone Ink Cost Calculation Feature
Problem/Question When using Contone printers, no dot sizes are available for calculating ink costs. Dithering, i.e. the dot distribution in the printout (simplified explanation), for Contone drivers cannot be carried out by the Ergosoft RIP, so that ...
Currency change for Cost Calculation
Problem/Question The default setting for the currency in Ergosoft RIP is USD. This can be changed to one of the additional 25 currencies at any time. "How can I change the currency for the Cost Calculation?" Solution/Work-Around Open the "Application ...
How to setup CostManager
Problem/Question How to setup Cost Manager Solution/Work-Around Manage Media List Run CostManager and go to tab "Manage Media List" Click <New> to add Media to the list Insert the Cost Factor and an optional Description and confirm with <OK> Give a ...
Epson Edge Dashboard Media Selection
What presetting must be made in the Epson Edge Dashboard for custom profiling? When using an Epson HTM driver, media presets can be called up in the device options. This is usually done via the Epson Edge Dashboard for the Epson printer registered ...
How to create a custom PrintQueue Maintenance Job
Problem/Question To prevent printhead nozzles clogging in certain situations, Maintenance Jobs can be activated in the PrintQueue. Maintenance Jobs are small print jobs to be printed between production jobs utilizing all inks channels. There are ...