[AE=1505] HP Raster Library Error –2

[AE=1505] HP Raster Library Error –2

Problem/Question
RIP Server stops processing the Job in print mode and displays the error message

[AE=1505] HP Raster Library Error –2
„HP Raster Library Error –2 Invalid parameter“

This error message most commonly appears on certain HP models when the settings in the Device Options of the Print Environment in the RIP do not match the settings on the printer’s panel.
Sometimes special signs (such as ö ä ü + % ...) in file names can lead to this error. 

Solution/Work-Around
  1. Check the connection to the printer
  2. Check if settings in the Device Options of the Print Environment match to the settings on the printer panel
  3. Check if the latest release of Ergosoft is installed
  4. Check if the latest firmware of the printer is installed to the printer
  5. Run updates if necessary
  6. Open the Device Options in the Print Environment at least once, to make sure the Raster Libraries refresh themselves
  7. Rename the image you want to print without the use of special characters

    • Related Articles

    • RIPServer Error -3

      "RIPServer Error -3"  This error can be found when trying to RIP a file in RipServer. Problem  "When printing, the rasterizing process stops and the RIPServer shows an error message that says:"  “[AE=1506]:PRINT ERROR #-3"  "This error message ...

    • [AE=1506] PRINT ERROR #-3

      Problem/Question When printing, the rasterizing process stops and the RIPServer shows an error message that says: “[AE=1506]:PRINT ERROR #-3" This error can be found when trying to RIP a file in RipServer. Solution/Work-Around Check the user access ...

    • Mimaki – Parameter Error (PICT)

      Problem/Question When sending a job to a Mimaki printer, the job is not printed and you get an error message on the printer display. The print settings and device options of the current Print Environment are not supported by the printer. This may be ...

    • Mimaki - Error 11 or 202 Parameter

      Problem/Question When sending a job to a Mimaki printer, the job is not printed and you get an error message on the display of the printer: “ERROR 11 - PARAMETER ERROR" or "ERROR 202 - PARAMETER" depending on the model you are using. The print ...

    • How does the HP media profiling workflow work?

      Problem/Question HP provides a couple of ready-made color profiles embedded in the HP media presets. They can be applied to the Ergosoft Print Environment by pressing the "Retrieve ICC Profile" button in Device Options. If no suitable ICC is ...